4 License and pisowifi settings
The 2-day trial starts when WAN first reaches the license server. Activate your LazyDEV key before it ends, then set coin rates and your pisowifi name.
Open the owner dashboard
- Open http://10.0.0.1/admin/
- Log in with the password you set in step 3.
Customers cannot open this page
Only the owner network can reach the dashboard. That keeps your settings safe.
Activate your license
- Click License in the left menu.
- Paste the key you got from lazydevsystems.com.
- Click Activate. Product name fills in automatically (LZDV-EW1200G).
- Wait until status shows Active.
Internet on the WAN port is required to start the trial and to activate. The router remembers the original 2-day end time; reflashing the same router does not mint a new trial. Paid license checks run about once per day.
Before WAN is connected
Customer wifi shows Connect WAN to start the 2-day trial. After the trial expires, it shows Trial is over, please activate. Coin insert and vouchers stay off until the trial is running or a license is Active.
Basic pisowifi setup
| Menu page | What to fill in |
|---|---|
| Settings | pisowifi name (shown to customers), admin password, Discord webhook alerts |
| Rates | How many pesos equals how many minutes (example: 5 pesos = 30 minutes). Add at least one rate. |
| Wireless | Check wifi names LazyFi@RuijieEW1200GPRO |
| System | Firmware update check |
Coin wiring notes (for step 5)
Default wire pins on the ESP32 board (you can change these later in Settings, Coin slot):
| Wire purpose | Default pin number |
|---|---|
| Coin pulse signal | Pin 12 |
| Relay to turn acceptor on/off | Pin 13 |